Installing laminate over tile may be possible for some products, but it is a project-specific decision. The condition of the existing surface and the finished floor height can change the answer.
Check the old floor
Loose tile, hollow spots, large grout recesses, or moisture concerns should not be buried under a new floating floor. The substrate must meet the new product's requirements.
Measure the new height
A new layer can affect doors, appliances, cabinets, and transitions to neighboring rooms. Make a simple height sketch before choosing the assembly.
Confirm the approved method
The laminate instructions should state whether installation over existing tile is allowed and what preparation is required. If not, removal and substrate preparation may be the safer path.
A practical checklist
- Inspect tile bond and surface condition.
- Measure door and transition clearances.
- Check the selected laminate's approved substrates.
Will underlayment hide uneven grout lines?
Do not rely on it without a product-specific flatness assessment and approved preparation method.
General planning information. Site conditions and the selected manufacturer's instructions determine the installation details.